CETRIS – cement-bonded particle boards

CETRIS® PD is a cement bonded particleboard with tongue and groove connection system and smooth surface. The cement bonded particleboard of 1,250 x 625 mm (including the tongue) is designed for dry flooring technology.

The following thicknesses are offered as standard: 16, 18, 20, 22, 24, 26, 28 mm. There is tongue and groove on the perimeter of the boards, and they are to be laid over beams or used in restoration of floors.

Technical specifications:
Basic size: 1 250 x 625 mm (Including tongue)
Board thickness: 16-18-20-22-24-26-28 mm
Bulk density: 1 150 – 1 450 kg/m³
Services: based on the customer’s requirements – milled edges, tongue and groove
Thickness tolerance: ±1,2 mm (th. 16 and 18 mm), ±1,5 mm (other thicknesses)
Surface finish: without surface finish

CETRIS® PDB is a sanded cement bonded particleboard with tongue and groove connection system and smooth surface

Technische Spezifikationen:
Grundformat: 1.250 x 625 mm (einschließlich Feder)
Plattendicken: 16-18-20-22-24-26-28 mm (nach Absprache 30-32-34-36-38 mm)
Flächengewicht: 1.150 – 1.450 kg/m3
Dienstleistungen: Kanten mit gefräster Nut+Feder, geschliffene Oberfläche
Dickentoleranzen: +-0,3 mm
Oberflächenbehandlung: ohne Oberflächenbehandlung

CETRIS® PLUS is a cement-bonded particleboard with smooth surface treated with primer coat. It is produced by pressing a mixture of wood chips (63% by volume), Portland cement (25% vol.), water (10% vol), and hydration additives (2% by volume); it is available in standard thicknesses of 8, 10, 12, 14, 16 , 18, 20, 22, 24, 26, 28, 30, and 32 mm. Both sides and all edges are treated with white primer. The primer coat improves the bonding power between the board and the surface finish, reduces rate of absorption and consumption of the paint for final coat; it comes as both sided, including the edges. The reverse side has a lower opacity and irregular structure. The basic size of the board is 3,350 x 1,250 mm.

We deliver the boards cut to the sizes specified by the customer, with rounded edge or chamfered edge to 45° angle, milled starting from the 12-mm thickness with half-groove, starting from the 16-mm thicknes with tongue and groove. The boards may also be delivered with pre-drilled holes. The cement-bonded particleboard are used mainly as a structural material in cases where moisture resistance, strength, fire resistance, ecological and hygienic harmlessness are required at the same time. CETRIS® Boards do not contain either asbestos or formaldehyde; they are resistant to insects and mold exposure. They are fireproof and can provide sound insulation. The boards can be worked with conventional woodworking tools.

Technical specifications:
Basic size: 3 350 x 1 250 mm
Board thickness: 8-10-12-14-16-18-20-22-24-26-28-30-32 mm
Bulk density: 1.150 – 1.450 kg/m3
Services: based on the customer’s requirements – cutting, drilling holes, shrinkage, edge cutting and milling
Hue: color shade: 0100 – white
Surface finish: primer coat

CETRIS® FINISH is a cement-bonded particleboard with smooth surface treated with a primer coat and surface finish. It is produced by pressing a mixture of wood chips (63% by volume), Portland cement (25% vol), water (10% vol), and hydration additives (2% by volume); it is available in standard thicknesses of 10, 12, 14, and 16 mm. Hue can be chosen according to RAL and NCS colour charts. The selection should exclude shades of pearl, reflective, metallic and with low opacity (we recommended consultation with the manufacturer). The basic size of the board is 3,350 x 1,250 mm.

We deliver the boards cut to the sizes specified by the customer, with rounded edge or chamfered edge to 45° angle, milled starting from the 12-mm thickness with half-groove, starting from the 16-mm thicknes with tongue and groove. The boards may also be delivered with pre-drilled holes. The CETRIS® FINISH boards are primarily used as exterior facade sheathing boards. The cement-bonded particleboard are used mainly as a structural material in cases where moisture resistance, strength, fire resistance, ecological and hygienic harmlessness are required at the same time. CETRIS® Boards do not contain either asbestos or formaldehyde; they are resistant to insects and mold exposure. They are fireproof and can provide sound insulation. The boards can be worked with conventional woodworking tools. The back side of CETRIS® FINISH cement bonded particle boards is treated with primer coat without a regular texture, look and sufficient covering power. The colour shade of the coat is not specific, therefore the requirement for a white or transparent shade needs to be specified in the order in advance.

Technical specifications:
Basic size: 3.350 x 1.250 mm
Board thickness: 10-12-14-16 mm
Bulk density: 1.150 – 1.450 kg/m3
Services: based on the customer’s requirements – cutting, drilling holes, shrinkage, edge cutting and milling
Surface finish: primer coat

CETRIS® LASUR is a cement bonded particle board with a smooth surface, treated with pigmented primer paint and a varnish glazing as the colour top coat. It is produced by pressing a mixture of wood chips (63% by volume), Portland cement (25% vol), water (10% vol), and hydration additives (2% by volume); it is available in standard thicknesses of 10, 12, 14, and 16 mm. Hue is possible to select according to the colour charts provided by the manufacturer of the CETRIS® boards. The glazing top coat provides a solid but non-uniform appearance. The basic size of the board is 3,350 x 1,250 mm. We deliver the boards cut to the sizes specified by the customer, with rounded edge or chamfered edge to 45° angle, milled boards with thickness of 12 mm rebated. The boards may also be delivered with pre-drilled holes. The

CETRIS® LASUR boards are primarily used as exterior facade sheathing boards. The cement-bonded particleboard are used mainly as a structural material in cases where moisture resistance, strength, fire resistance, ecological and hygienic harmlessness are required at the same time. CETRIS® Boards do not contain either asbestos or formaldehyde; they are resistant to insects and mold exposure. They are fireproof and can provide sound insulation. The boards can be worked with conventional woodworking tools. The back side of CETRIS® LASUR cement bonded particle boards is treated with primer coat without a regular texture, look and sufficient covering power. The colour shade of the coat is not specific, therefore the requirement for a white or transparent shade needs to be specified in the order in advance.

Technical specifications:
Basic size: 3.350 x 1.250 mm
Board thickness: 10-12-14-16 mm
Bulk density: 1 150 – 1 450 kg/m³
Services: upon request: cutting, drilling holes, shrinkage, edge cutting and milling
Shades: according to the colour chart* CETRIS ® LASUR (twelve colours)Surface finish: pigmented primer, varnish glazing top coat

CETRIS® INCOL is a cement-bonded particleboard with a smooth surface, tinted with black pigment in the mass. It is produced by pressing a mixture of wood chips (63% by volume), Portland cement (25% vol.), water (10% vol), and hydration additives (2% by volume); it is available in standard thicknesses 12 mm. The basic size of the board is 3,350 x 1,250 mm.

We deliver the boards cut to the sizes specified by the customer, with rounded edge or chamfered edge to 45° angle, milled starting with half-groove. The boards may also be delivered with pre-drilled holes. The cement-bonded particleboard are used mainly as a structural material in cases where moisture resistance, strength, fire resistance, ecological and hygienic harmlessness are required at the same time.

CETRIS® Boards do not contain either asbestos or formaldehyde; they are resistant to insects and mold exposure. They are fireproof and can provide sound insulation. The boards can be worked with conventional woodworking tools.

Technical specifications:
Basic size: 3.350 × 1.250 mm
Board thickness: 12 mm
Bulk density: 1 150 – 1 450 kg/m³
Services: upon request: cutting, drilling holes, shrinkage, edge cutting and milling
Surface: smooth
Surface finish: teinted with black pigment in the mass